Home / Acoustic panels / Microperforated acoustic panel (D+ System)
Home / Acoustic panels / Microperforated acoustic panel (D+ System)
Decustik microperforated panels in slat format are designed to be installed on interior ceilings and walls. In addition to their aesthetics, they improve the acoustic performance within the room by reducing reverberation.
The surface of the panels is covered with tiny microperforations on the visible side, which trap sound and reduce reverberation in the room, and with large grooves on the back side, which help increase the absorption coefficient.
With microperforated panels in slat format, we obtain a smooth and durable product. They do not accumulate dust and are easy to clean.
The supporting material is MDF (medium-density fibreboard), either standard or fire-retardant. Surface finishes can be raw, melamine, veneered with natural wood, varnished, or lacquered. For other options, please enquire.
The microperforated panels incorporate an acoustic veil on the back to enhance sound-absorbing qualities.
Microperforated panels in slat form. Suitable for both walls and ceilings, the installation system is tongue and groove. The longitudinal joints are visible and the transverse joints are barely noticeable thanks to the butt joint and the use of large-sized panels. When installing on ceilings, special care must be taken to ensure the proper connection of the transverse profiles. If accessible areas are needed, they must be planned during the installation.
Slat length: 2400mm.
Slat modulation: 192mm.
Thickness (excluding the rear chamber): 16mm, for both wall and ceiling applications.
Microperforations of Ø0.5mm. With a distance between holes of 2.7mm and 137,000 microperforations per m², they have class “B” acoustic absorption certification.
We test our acoustic panels in certified laboratories to confirm the absorption coefficients of our acoustic panels. This way, we can create high-performance acoustic absorption panels.
For special projects, we can manufacture highly customised solutions.
Based on slats where the assembly system is tongue and groove.
Simplified wall and ceiling mounting by simply changing the accessories.
Tested in certified laboratories to confirm the level of absorption.
Customised materials, designs and finishes.
The surface is covered with microperforations that trap sound.
Smooth and resistant. Dust-free and easy to clean.
Maple cathedral grain
White beech cathedral grain
Steamed beech straight grain
European oak straight grain
Bamboo vertical caramel
Cherry cathedral grain
American walnut cathedral grain
Wenge straight grain (reconstituted wood)
Maple
Beech
Steamed beech
Cherry wood
Oak
White
Aluminium
Install a T24 profile structure made of main runners, 600mm cross tee and wall angle profiles correctly aligned and leveled.
When assembled with alternate joints you must apply white glue for wood on the ends of the slats to minimize the opening of the joints.
Installation system 1
Omega profiles
Installation system 2
Direct clip
Installation system 3
Nailed and glued