Home / Acoustic panels / Random acoustic panel (D+ System)
Home / Acoustic panels / Random acoustic panel (D+ System)
Decustik wood panels in slat format are designed for installation on interior ceilings and walls. In addition to their aesthetics, they enhance the acoustic performance of the room by reducing reverberation.
Aesthetically, they have a linear design suitable for horizontal or vertical installation, providing great freedom in the final finish.
With randomly grooved slats, we obtain an attractive, durable, and easy-to-clean product.
The supporting material is MDF fibreboard, either standard or fire-retardant. Surface finishes can be raw, melamine-coated, veneered with natural wood sheets, varnished, or lacquered.
These random groove slats incorporate an acoustic fleece on the back to improve sound absorption performance.
Random panels in slat format. Suitable for both walls and ceilings, the installation system is tongue-and-groove. The linear joints are visible, and the transverse ones are barely noticeable due to the butt joint and the use of large slats. If accessible false ceiling areas are needed, they must be planned at the time of installation.
Slat length: 2400mm.
Slat modulation: 192mm.
Thickness (excluding the rear chamber): 16mm, for both wall and ceiling applications.
We test our acoustic panels in certified laboratories to confirm their absorption coefficients, ensuring a high level of sound absorption.
Depending on materials and finishes, we can supply panels with fire resistance up to class B according to UNE-EN 13501 standards.
For special projects, we can manufacture highly customised solutions.
Based on slats where the assembly system is tongue and groove.
Simplified wall and ceiling mounting by simply changing the accessories.
Tested in certified laboratories to confirm the level of absorption.
Customised materials, designs and finishes.
We can produce panels with levels of fire resistance up to Class B-s1,d0.
Solid system, resistant to impacts.
Maple cathedral grain
White beech cathedral grain
Steamed beech straight grain
European oak straight grain
Bamboo vertical caramel
Cherry cathedral grain
American walnut cathedral grain
Wenge straight grain (reconstituted wood)
Maple
Beech
Oak
Cherry wood
Black
White
Aluminium
Installation system 1
Omega profiles
Installation system 2
Direct clip
Installation system 3
Nailed and glued
Vertical slats installation.
Only nailed and glued
When assembled with alternate joints you must apply white glue for wood on the ends of the slats to minimize the opening of the joints.
Properly level a T24 structure made up of primary profiles, secondary profiles of 600 mm, and perimeter profiles.
Fixation clips must be attached to the primary profiles.